Price per square meter in Condesa and Roma

The number that matters is not the price in the listing. It is the price per square meter, and how long a deal takes to close. These are the figures for each neighborhood.
Comparing two apartments by the listing price tells you nothing: 60 m² at $28,000 MXN a month is more expensive than 90 m² at $38,000. Price per square meter sorts the market out and explains why two neighboring areas feel so different.
These are the rent and sale prices per square meter in the four neighborhoods that make up Condesa and Roma, how long each one takes to close a deal, and what makes an apartment sell above or below the average.
Price per square meter in each neighborhood
The figures are reference averages for apartments in the area, reviewed in October 2026, in Mexican pesos. The days are the average time a listing takes to rent or sell.
| Neighborhood | Monthly rent per m² | Sale per m² | Days to rent | Days to sell |
|---|---|---|---|---|
| Condesa | $412 | $71,300 | 38 | 74 |
| Hipódromo | $425 | $73,800 | 40 | 79 |
| Roma Norte | $398 | $68,900 | 44 | 82 |
| Roma Sur | $355 | $58,500 | 47 | 95 |
Rent
Condesa averages $412 MXN per square meter a month and Hipódromo a little more, because that is where the best-kept buildings and Parque México are. Roma Norte is close behind, and Roma Sur sits 10% to 15% below, which is where the best price-to-meter ratio in the area is.
Translated into actual apartments, this is the monthly rent for the most common sizes:
| Neighborhood | 60 m² | 90 m² | 120 m² |
|---|---|---|---|
| Condesa | $24,700 | $37,100 | $49,400 |
| Hipódromo | $25,500 | $38,300 | $51,000 |
| Roma Norte | $23,900 | $35,800 | $47,800 |
| Roma Sur | $21,300 | $32,000 | $42,600 |
Sale
The sale price per square meter runs around $71,300 MXN in Condesa and $73,800 in Hipódromo. What pushes that number up is the condition of the building and parking; what pushes it down is the ground floor and interior apartments with no direct light.
Roma Norte is just below, at $68,900, with more new construction lifting the average. Roma Sur, at $58,500, is the entry point to the area: a 90 m² apartment there costs around $5.3 million pesos, against $6.4 million in Condesa.
What raises and lowers the price per square meter
Within the same neighborhood, the price per square meter can vary by 25% or more. These are the factors that weigh most, with their approximate effect on the average:
| Factor | Effect | Why |
|---|---|---|
| Parking | +5% to +10% | It is scarce in 1930s buildings and hardly anyone rents it out cheaply on the side. |
| Elevator | +3% to +8% | It opens the apartment up to families and older buyers. |
| Private terrace or roof | +5% to +15% | Outdoor space is the scarcest thing in the area. |
| Facing the park or on Ámsterdam | +5% to +10% | The view, the trees and the most walkable street in the city. |
| Ground floor | −10% to −15% | Less light, more noise and less privacy. |
| Interior with no direct light | −10% to −15% | It looks worse in photos and rents more slowly. |
| Fourth or fifth floor with no elevator | −5% to −10% | It shrinks the list of interested buyers. |
How to calculate a listing's price per square meter
It is a simple division, but it has to be done with the right square meters:
- Use the private square meters on the deed, not the total built area, which includes walls and common areas.
- Keep balconies and terraces separate: they have value, but not as interior space. A common rule is to count them at half.
- Divide the sale price, or the monthly rent, by the square meters and compare the result with the neighborhood's figure in the table.
- If the listing does not give the square meters, ask before you go see it: it is the first sign of an inflated price.
Why each neighborhood moves differently
Condesa and Hipódromo have almost no land for new construction and their architecture is protected, so supply barely grows and prices hold. Roma Norte has more turnover and more new construction; there the price is set by the project, not the neighborhood. Roma Sur gets compared with Narvarte and Del Valle, and that keeps it lower.
If you are choosing between the two to buy, the full comparison (yield, liquidity and building type) is in buying an apartment in Condesa or Roma.
Asking price versus closing price
Listings show what the owner is asking, not what ends up being paid. Sales usually leave room to negotiate; rentals, where an apartment fills in five to seven weeks, leave less. The tables in this guide are for comparing listings with each other, and for negotiating, the most useful number is time on the market.
An apartment that has gone well past its neighborhood's average days (74 to sell in Condesa, 95 in Roma Sur) is almost always priced above market. One that just came out at the average price per square meter probably will not come down.
What the price per square meter leaves out
Price per square meter is for comparing, not for budgeting. When you pay, other items come on top that the table does not show. On a 90 m² apartment in Condesa, $6,417,000 MXN at the average price, closing costs alone come to between $353,000 and $449,000.
| Item | How much | When you pay it |
|---|---|---|
| Closing costs | 5.5% – 7% of value | Once, when you buy |
| Building fee in Condesa | $1,800 – $3,200 a month in restored buildings; up to $5,000 in new buildings with amenities | Every month |
| Parking rented separately | $1,500 – $3,000 a month | Every month, if the apartment has none |
| Property tax (predial) | Based on the cadastral value | Every two months, or the full year in advance |
Pre-construction versus resale
New construction sold pre-construction goes for 10% to 20% below the price it will have at delivery. If an apartment will be worth $71,300 MXN per square meter once finished, pre-construction buyers pay between $57,040 and $64,170 per square meter.
Compare against the right number: a new building with parking and an elevator is usually delivered above the neighborhood average, which includes 1930s buildings. The discount is measured against what that same apartment will cost finished, not against the average. What to review before putting down a deposit is in what to check before buying pre-construction.
How to use the price per square meter to negotiate
The factor table above is the tool. This is how to use it on a specific listing:
- Work out the listing's price per square meter with the private square meters and put it next to the neighborhood average.
- If it is above, look for the reason in the factor table: parking, elevator, terrace, location. If you cannot find one, that is your argument.
- If it is below, ask why before getting excited: ground floor, interior with no light, approved special assessments or a building with no structural safety report.
- Compare against the same type of building: a 1930s apartment against another like it, new construction against new construction.
- For rentals, do the same math with the monthly rent and add the building fee: two equal rents with different fees do not cost the same.
Yield: what the rent pays
Gross yield is one year of rent divided by the purchase price. With the averages in the table, Condesa, Hipódromo and Roma Norte yield around 6.9% gross a year, and Roma Sur close to 7.3%. After the building fee, property tax, vacancy and management, the net usually lands between 4.5% and 5.5%.
See the listings in each neighborhood
Active listings show the price and the square meters, so you can apply the table directly: apartments for rent in Condesa, for sale in Condesa, for rent in Roma Norte, for sale in Roma Norte and for sale in Roma Sur.
Frequently asked questions
How much does a square meter cost in Condesa?
To buy, around $71,300 MXN per square meter on average, and $73,800 in Hipódromo. To rent, about $412 per square meter a month.
How much does a square meter cost in Roma?
In Roma Norte, about $68,900 MXN per square meter to buy and $398 a month to rent. In Roma Sur, around $58,500 to buy and $355 a month to rent.
Which is cheaper, Condesa or Roma?
Roma Norte costs almost the same as Condesa. Roma Sur is cheaper: about 14% per square meter to rent and 18% to buy.
How is the price per square meter calculated?
Divide the sale price, or the monthly rent, by the apartment's private square meters. Balconies and terraces are usually counted at half.
What does renting out an apartment in Condesa yield?
Around 6.9% gross a year at average prices. After the building fee, property tax, empty months and management, the net yield usually lands between 4.5% and 5.5%.
How long does it take to rent an apartment in Condesa?
38 days on average, the shortest in the area. In Roma Norte it is around 44 days and in Roma Sur about 47. A well-photographed apartment at market price can rent in under three weeks.
Are the square meters in the listing the same as on the deed?
Not always. Some listings give the built area, which includes walls and sometimes common areas. To calculate the price per square meter, use the private square meters on the deed and count balconies and terraces separately.
How much cheaper is a square meter in pre-construction?
Between 10% and 20% against the price the finished apartment will have. The discount is larger in the early stages of construction, when the risk is also larger.
Looking for a place around here
Keep reading
We'll tell you about what gets listed around here
If you're looking around here, leave your email and we'll write when something that fits comes in.


















